Product Center
AAC Block Production Line
Concrete Mixing Station
Wall Panel Machine
Concrete pipe machine
Roof tile machine
Non-vibration Block Machine
Cement Brick Machine

Production address:Guangxi nanning the ridge rock industrial zone

Sales phone:0086-771-6319788

After the telephone:0086-771-6036728


Wall Panel Making Machine
  • Product introduction
  • Detailed parameters
  • Video presentation
  • Purchase consulting

Main Feasture: 


(1)The machine adopts PLC and touch screen control, automatic filling, electronic weighing, temperature control, material level control to realize automatic production.  

(2) With the same machine, it can adjust the panel size and thickness. The thickness will be from 60 to 180mm. 

(3) The closed constant pressure foamng barrel features of high heating efficiency and saves stem. 

(4)High precise guiding pressure reducing valve controls the temperature and steam pressure of the closed barrel, ensuring the outcome pressure of the valve constant and the inner temperature controlled wihin ±1%, which keeps the foamed material equal and prevents the bead agglomerate because of the bad temperature control. 

(5)With photoelectric or vibration sensor to control material level, ensuring density tolerance within ±3%. 

(6)The machine is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and material conveying to silos. 

(7)Most components are of world-famous brands, with reliable performance, stable quality, long service life and low maintenance cost. 

(8)The machine can realize the primary and second expansion.

Guangxi Hongfa factory production of "light composite wallboard Hongfa" brand light composite wallboard equipment in the production of several major characteristics:

1, light, economic

Light composite wallboard quality light, 75mm thick wall panels for 120mm + two masonryplastering wall weight 1/3~1/5. Light composite wallboard can optimize the beam columnstructure, can be installed easily in the non load bearing beam column, so that the overall indoor layout more reasonable.

Thin body - increase the use area. According to national building partition wall slatspecification, with light composite wallboard 75mm and the 100mm can be used instead of the conventional 120mm and 180mm thick brick wall brick. Use of lightweight composite wall panel system, build the 10~12m to extend the wall can increase the use of 1m2 area, an increase in the use of 4~6%, the partition is very suitable for shops and residential and household.

2, fire

Light composite wallboard partition system noncombustible performance reach the nationalA-level standards, wall after the installation is complete, has the stability and integrity of thesuperior, have good performance of fire resistance, fire and smoke and gas can be localized in the fire area, and does not emit toxic gases, for your safety guarantee more.

3, heat insulation, thermal insulation

Light composite wallboard is an ideal product for the outside of the building, interior partition wall energy-saving plate. It has the seasonal climate changes and automatically adjust themoisture content in the indoor air of the function, so as to keep the humidity of a constantlevel, to achieve the ecological regulation effect, with the trend of Hyundai Residence building.

4, sound insulation

Sound insulation thickness of 100mm light compound wallboard is up to 46dB, much higher than that of other brick wall sound insulation effect, consistent with the requirements ofnational residential sound insulation.

5, moisture-proof, waterproof

Light composite wallboard panels for medium density fiber reinforced cement plate, with waterproof, moisture-proof performance is good, can be used for kitchen, bathrooms,basements and other wet areas, wall plate does not appear due to moisture absorption and loose, brine, deformation, strength decline. The experiments prove that the wallboard canmake any finishes in no circumstances, use cement pool filled with water, the back of the wall plate can keep dry without leaving any traces, in wet weather the wall also no condensing water.

Simple construction, short construction period

Light composite wallboard is assembled type construction, the wall height below 4m, about 3 workers each, on average a skilled workers a day to effect shipment more than 15m2, and noneed of plaster wall smooth sides, compared with masonry wall construction efficiency is improved by more than 10 times.

6, environmental protection

Light composite wallboard 100% does not contain harmful to human body material, meet the national GB6566-2001 "building materials radionuclides Limited" standard, the main of radioactivity of building materials and a type decoration material, the use scope is not subject to any restrictions.

Repeated use rate of 70-90%

Light composite wall panels can be repeatedly used, very suitable for the regular change of indoor partition, such as shopping malls, office buildings etc.. Solid wall plate disassembly and assembly are very convenient, can greatly improve the utilization efficiency and economic benefit of the product, will not cause the construction waste and affect the normal businesssurrounding the tenants.

7, shock resistance, good integrity

After the test, impact resistant performance of light composite wallboard is 1.5 times the general masonry. Using the method of structural steel anchor, high wall intensity, can be used for height, span big wall; seismic performance of masonry wall is higher than the overallaverage dozens of times, can meet the seismic intensity of 8 class above the building requirements.

8, can be nailed, hanging, the price is reasonable

Light composite wallboard can directly nailing or expansion bolt for hanging heavy objects,such as air conditioners, condole, single point suspension force is more than 50kg; dry hanging marble frame can bear directly on the wallboard.

Suggested StaffingTable:

产品名称: A brief introduction to the Light composite wallboard
称 呼: * 必填
电子信箱: * 必填。
联系电话: * 必填。
地 址: * 必填
主 题: * 必填
留言内容: * 必填